Hollander Welcome to our store! Engine 2.9L VIN 9 8th Digit Opt Llv 57k Miles Fits 08-12 CANYON 828858 Description **PLEASE CHECK FITMENT WITH VIN BEFORE PURCHASING!**, ENGINE WARRANTY INSTALLATION PROCEDURES PRIOR TO INSTALLATION OF OUR USED ENGINE: We require these steps be taken for the warranty to be valid. Also please note while engines may come with accessories these are not covered under any warranty. Engines are guaranteed against knocking and excessive smoking. The warranty is void if engine\'s heat tab is melted or removed. PRE-INSTALLATION REQUIREMENTS: Drain and replace engine oils to manufacture suggested levels. Replace oil, air, and fuel filters. Replace valve cover gaskets. Replace oil pan gasket and rear main seal. IF NEEDED: replace timing gears, chains or belts and gaskets. Replace thermostat and gasket. Flush cooling system and re-fill. Install new spark plugs and wires. Install new belts and hoses. Failure to provide proof any of these steps were not taken may void the warranty. ANY ENGINE THAT IS CLAIMED TO BE DEFECTIVE, WE REQUIRE VERIFICATION OF THESE STEPS FOLLOWED, AND WE WILL SEND OUT AN INSPECTOR AT OUR DISCRETION TO SUBMIT A REPORT TO US.
Donor Vehicle Model : COLORADO Year : 2010 Mileage : 57000 (0 = not available or unknown) Stock Number : 25181C Notes : LOW MILES
This Part Will Fit These Makes And Models With These Options CANYON 08-12 2.9L (VIN 9, 8th digit, opt LLV)
COLORADO 08-12 2.9L (VIN 9, 8th digit, opt LLV)
ISUZU I-290 07-08 (2.9L, VIN 9, 8th digit, opt LLV)
About Us Payment Shipping Returns Warranty About Us
We offer quality-tested auto parts.
If you have a question about a part please contact us BEFORE purchasing.
Our main contact method is Messages. We try to answer all messages within 24 hours. If we are unable to answer your questions before the listing ends the item will be re-listed again soon for you to purchase.
Payment
All orders must be paid in full prior to shipment. Payments are processed through . We accept credit card and cash for Local Pickup orders. If payment is not received, an unpaid Item case will be opened for the sake of seller fee reimbursement.
Shipping
Items are shipped after receiving cleared payment. We ship to US addresses within the continental 48 states.
For items shipped via LTL Freight.
A commercial address is NOT required. Shipping to a residential address is possible, but will be more expensive. Shipping engines and transmissions have free shipping whether to a business address or residential address.
For small items, they will ship with UPS with live tracking information. You will receive an email with tracking information as soon as your part ships. Please allow 1-5 business days for your part to arrive.
Returns
All returns must be made within 30 days of the date purchase. The original invoice must accompany all returns. Parts must be returned in the same condition, complete, and undamaged. Refunds will be processed within 72 hours of receiving part.
Return shipping charges and original shipping charges will not be returned to the buyer when it is the buyer\'s error, remorse, etc, (changed my mind, found a better price, don’t like it, ordered by mistake). The buyer will pay return shipping charges and original shipping charges, even if it is free shipping. The shipping charges will be taken out of the refund amount.
If we have made a mistake, shipped the wrong item, part is defective, etc, we will resolve the issue at our cost.
If a part fails to perform properly, please contact us before taking additional action. Our parts are tested and did work on the donor vehicle, we will first assist you or your mechanic to verify the correct installation and programing procedure has been completed. In the unlikely event a part fails within the term of the warranty we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option.
TRANMISSION WARRANTY AND INSTALLATION PROCEDURE
Prior to installation of your used transmission, we require these steps be taken for the warranty to be valid. Failure to provide proof these steps were taken will void any warranty. Pre-Installation Requirements: Replace all seals. Install new filter kit. Flush and inspect cooling lines. Align and engage torque converter into the front pump. Fill trans with manufacture specified fluid. Clear all transmission computer codes prior to starting or operating the vehicle. Adjust throttle position sensor cable.
ENGINE WARRANTY AND INSTALLATION PROCEDURE
Prior to installation of your used engine, we require these steps be taken for the warranty to be valid. Also please note while engines may come with accessories these are not covered under any warranty. Engines are guaranteed against knocking and excessive smoking. The warranty is void if engine\'s heat tab is melted or removed.
Pre-Installation Requirements: Drain and replace engine oils to manufacture suggested levels. Replace oil, air, and fuel filters. Replace valve cover gaskets. Replace oil pan gasket and rear main seal. If needed replace timing gears, chains, or belts & gaskets. Replace thermostat & gasket. Flush cooling system and re-fill. Install new spark plugs & wires. Install new belts and hoses. Failure to provide proof any of these steps were not taken may void the warranty.
Warranty
All parts come with a standard 30 day warranty, please contact us for details prior to ordering. Details will be included with the packing slip for each order. Labor and costs associated with part installation are not included in the warranty, parts only.
We have extended warranties as well for up to 2 years, please contact us for that information.
Copyright © 2022, All Rights Reserved.
Template Design & Developed By:
Copyright © 2022, All rights reserved.
Design & Developed By : eFusionWorld
Related Items:
1986 Print Ad Ford Ranger STX 4WD Pickup Trucks with 2.9 L V-6 Engines
$19.78
1987 Ford Ranger SuperCab 2.9L V-6 Engine 140HP STX Trim 2-Page Vintage Print Ad
$9.12
Starter Solenoid Relay SW-3 12V for Ford Jeep Lincoln Mercury 1958-1991
$18.31
