Pontiac Astre Vega Drag Race Roller For Sale

 I have a 1975 Pontiac astre, its similar to a vega. It has a 8 point roll cage, Chris Alston subframe connectors, custom aluminum dash with aftermarket Autometer gauges, Summit 16 gal fuel cell done really well I might add, and 1/2 inch aluminum fuel lines going to the front and a return. The wiring is all new and all done except for the engine harness which you have to cut and adjust to the motor you place in it. I have most of the trim and interior pieces, both front seats, no carpet, and the headliner is still their but has minor damage due to the cage install, also the kick panel on the drivers side foot has some burn marks from the cage install. I also have Sphon adjustable upper and lower rear control arms, they are not installed. It has two front runner Centerline wheels with tires that have very low miles. Has a 4 inch cowl fiberglass hood that bolts on to custom aluminum hood hinges, it has pins as a latch. Very low rust, I cant think of any area besides the stock battery tray area. It has two damage spots in the driver fender and the passenger side behind the door, I have included pictures of both damage areas. It Is a roller meaning no engine or trans, it has the stock rear end with five lug axles. The motor mounts have been set up for a ls motor so for a sbc it should be the same but no guarantees. I will Take The Front Wheels off the car and take 150 dollars off the winning bid price if that is a option for some.